FORTINET - PASS-SURE NSE7_EFW-7.2 - EXAM SAMPLE FORTINET NSE 7 - ENTERPRISE FIREWALL 7.2 QUESTIONS

Fortinet - Pass-Sure NSE7_EFW-7.2 - Exam Sample Fortinet NSE 7 - Enterprise Firewall 7.2 Questions

Fortinet - Pass-Sure NSE7_EFW-7.2 - Exam Sample Fortinet NSE 7 - Enterprise Firewall 7.2 Questions

Blog Article

Tags: Exam Sample NSE7_EFW-7.2 Questions, NSE7_EFW-7.2 Latest Test Dumps, Certification NSE7_EFW-7.2 Dumps, NSE7_EFW-7.2 Latest Exam, NSE7_EFW-7.2 Book Free

Failure in the Fortinet NSE 7 - Enterprise Firewall 7.2 (NSE7_EFW-7.2) exam dumps wastes the money and time of applicants. If you are also planning to take the NSE7_EFW-7.2 practice test and don't know where to get real NSE7_EFW-7.2 exam questions, then you are at the right place. DumpsQuestion is offering the actual NSE7_EFW-7.2 Questions that can help you get ready for the examination in a short time. These Fortinet NSE7_EFW-7.2 Practice Tests are collected by our team of experts. It has ensured that our questions are genuine and updated. We guarantee that you will be satisfied with the quality of our NSE7_EFW-7.2 practice questions.

Fortinet NSE7_EFW-7.2 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Security profiles: Using FortiManager as a local FortiGuard server is discussed in this topic. Moreover, it delves into configuring web filtering, application control, and the intrusion prevention system (IPS) in an enterprise network.
Topic 2
  • Routing: It covers implementing OSPF to route enterprise traffic and Border Gateway Protocol (BGP) to route enterprise traffic.
Topic 3
  • System configuration: This topic discusses Fortinet Security Fabric and hardware acceleration. Furthermore, it delves into configuring various operation modes for an HA cluster.
Topic 4
  • VPN: Implementing IPsec VPN IKE version 2 is discussed in this topic. Additionally, it delves into implementing auto-discovery VPN (ADVPN) to enable on-demand VPN tunnels between sites.
Topic 5
  • Central management: The topic of Central management covers implementing central management.

>> Exam Sample NSE7_EFW-7.2 Questions <<

NSE7_EFW-7.2 Latest Test Dumps | Certification NSE7_EFW-7.2 Dumps

Are you still staying up for the NSE7_EFW-7.2 exam day and night? If your answer is yes, then you may wish to try our NSE7_EFW-7.2 exam materials. We are professional not only on the content that contains the most accurate and useful information, but also on the after-sales services that provide the quickest and most efficient assistants. With our NSE7_EFW-7.2 practice torrent for 20 to 30 hours, we can claim that you are ready to take part in your NSE7_EFW-7.2 exam and will achieve your expected scores.

Fortinet NSE 7 - Enterprise Firewall 7.2 Sample Questions (Q51-Q56):

NEW QUESTION # 51
Refer to the exhibit, which shows the output of a BGP summary.

What two conclusions can you draw from this BGP summary? (Choose two.)

  • A. The neighbors displayed are linked to a local router with the neighbor-range set to a value of 4.
  • B. External BGP (EBGP) exchanges routing information.
  • C. The router 100. 64. 3. 1 has the parameter bfd set to enable.
  • D. The BGP session with peer 10. 127. 0. 75 is established.

Answer: B,D

Explanation:
The output of the BGP (Border Gateway Protocol) summary shows details about the BGP neighbors of a router, their Autonomous System (AS) numbers, the state of the BGP session, and other metrics like messages received and sent.
From the BGP summary provided:
A: External BGP (EBGP) exchanges routing information.
This conclusion can be inferred because the AS numbers for the neighbors are different from the local AS number (65117), which suggests that these are external connections.
B: The BGP session with peer 10.127.0.75 is established.
This is indicated by the state/prefix received column showing a numeric value (1), which typically means that the session is established and a number of prefixes has been received.
C: The router 100.64.3.1 has the parameter bfd set to enable.
This cannot be concluded directly from the summary without additional context or commands specifically showing BFD (Bidirectional Forwarding Detection) configuration.
D: The neighbors displayed are linked to a local router with the neighbor-range set to a value of 4.
The neighbor-range concept does not apply here; the value 4 in the 'V' column stands for the BGP version number, which is typically 4.


NEW QUESTION # 52
Refer to the exhibit, which shows an ADVPN network.

An administrator must configure an ADVPN using IBGP and EBGP to connect overlay network 1 with 2.
What must the administrator configure in the phase 1 VPN IPSEC configuration of the Hub2Hub tunnels?

  • A. set auto-discovery-sender enable
  • B. set auto-discovery-forwarder enable
  • C. set auto-discovery-receiver enable
  • D. set add-route enable

Answer: B


NEW QUESTION # 53
While configuring the BGP protocol, an administrator applies the set network-import-check disable command under config network.
What will FortiGate do as a result of this command?

  • A. FortiGate will not advertise any imported routes received from one BGP neighbor to another.
  • B. FortiGate will not advertise the prefixes, if it is not in the routing table.
  • C. FortiGate will advertise all the prefixes in the BGP network table to its BGP neighbor, even if it is not in the routing table.
  • D. FortiGate will advertise only the corresponding prefixes in the BGP network table to its BGP neighbor, even if it is not in the routing table.

Answer: C

Explanation:
Fortigate doesn't advertise the prefix. You can change this behavior by disabling the network- import-check setting. After you disable the setting, Fortigate advertises all prefixes in the BGP network table, regardless of the active routes present in the routing table.


NEW QUESTION # 54
Which statement is true regarding the Bidirectional Forwarding Detection protocol in BGP?

  • A. BFD is using BGP keepalive messages to check the status of BGP peer
  • B. BFD is only supported when two FortiGate devices are directly connected on the same network
  • C. BFD is used to detect one way device failure
  • D. BFD is enabled under config router bfd configuration

Answer: C


NEW QUESTION # 55
Refer to the exhibit, which shows an SSL certification inspection configuration.
SSL certification inspection configuration

While testing, the administrator updated the ssl-ssh-profile configuration with the command set sni-server-cert-check strict.
The administrator found that the server name indication (SNI) does not match either the common name (CN) or any of the subject alternative names (SAN) in the server certificate.
With respect to the set sni-server-cert-check strict command, which action does FortiGate take?

  • A. FortiGate closes the connection because this represents an invalid SSL/TLS header.
  • B. FortiGate uses the SNI from the user's web browser.
  • C. FortiGate uses the first entry listed in the SAN field in the server certificate.
  • D. FortiGate uses the CN information from the Subject field in the server certificate.

Answer: A


NEW QUESTION # 56
......

Our NSE7_EFW-7.2 study materials are in short supply in the market. Our sales volumes are beyond your imagination. Every day thousands of people browser our websites to select study materials. As you can see, many people are inclined to enrich their knowledge reserve. So you must act from now. The quality of our NSE7_EFW-7.2 Study Materials is trustworthy. We ensure that you will satisfy our study materials. If you still cannot trust us, we have prepared the free trials of the NSE7_EFW-7.2 study materials for you to try.

NSE7_EFW-7.2 Latest Test Dumps: https://www.dumpsquestion.com/NSE7_EFW-7.2-exam-dumps-collection.html

Report this page